BRIX₂ Inventory¶
Naming Conventions¶
BRIX₂ Base Modules came in 5 batches of 10 each. The modules were assembled and tested batch by batch. All batches are supposed to be identical. However, note that all prototypes are not 100% compatible to the final version and that one prototype can be significantly different from another, especially if they are a different version. The prototype BRIX₂ modules were named by prototype stage.
- Prototype 2: 20-24 (see also BRIX2_Prototype)
- 20: SRE Belt
- 24: Borrowed by Mario Heinz/Marc Hesse
- Prototype 3: 30-39 (see also BRIX2_Prototype)
- 30: SRE Belt
- 32: Borrowed by Mario Heinz
- 33:
- 36: Borrowed by Mario Heinz
- 37: SRE Black
- 38: SRE Green
- 39: Borrowed by Mario Heinz
This is why we continue counting from 50 onwards now.
- Final Version Batch 1: 50-59
- Final Version Batch 2: 60-69
- Final Version Batch 3: 70-79
- Final Version Batch 4: 80-89
- Final Version Batch 5: 90-99
Case Models are Ninja Classic (Ninja Body, flat bottom, original LEGO plate on top) and Ninja Modern (Ninja Body, Lego Bottom, 3D printed clear top).
Batch 1¶
| Module ID |
Test Report |
Notes |
Case |
Borrowed |
| 50 |
Sensor OK, LED OK, Charging OK, RF TX OK, RF RX OK |
|
Ninja Classic |
|
| 51 |
Sensor OK, LED OK, Charging OK, RF TX OK, RF RX OK |
Resistor on System Controller reset line is 0R instead of 1K |
Ninja Classic |
CSang (WSN) |
| 52 |
Sensor OK, LED OK, Charging OK, RF TX OK, RF RX OK |
|
?? |
JAnlauff/SRL |
| 53 |
Sensor OK, LED OK, Charging OK, RF TX OK, RF RX OK |
|
None |
Serial Port broke during Mozzi experiments. Needs investigation |
| 54 |
Sensor OK, LED OK, Charging OK, RF TX OK, RF RX OK |
|
?? |
JAnlauff/SRL |
| 55 |
Sensor OK, LED OK, Charging OK, RF TX OK, RF RX OK |
|
Ninja Classic |
|
| 56 |
Sensor OK, LED OK, Charging OK, RF TX OK, RF RX OK |
|
Ninja Classic |
|
| 57 |
Sensor OK, LED OK, Charging OK, RF TX OK, RF RX OK |
|
Ninja Classic |
CSchwede(IBSKOMM) |
| 58 |
Sensor OK, LED OK, Charging OK, RF TX OK, RF RX OK |
|
Ninja Classic |
|
| 59 |
Sensor OK, LED OK, Charging OK, RF TX OK, RF RX OK |
|
Ninja Classic |
THermann, Smart Cup |
Batch 2¶
| Module ID |
Test Report |
Notes |
Case |
Borrowed |
| 60 |
Sensor OK, LED OK, Charging OK, RF RX OK |
|
?? |
JAnlauff/SRL |
|
| 61 |
Sensor OK, LED OK, Charging OK, RF RX OK |
|
Ninja Classic |
|
| 62 |
Sensor OK, LED OK, Charging OK, RF RX OK |
|
Ninja Modern |
|
| 63 |
LED OK, Charging OK, I2C defective, possible power short or damaged MPU, RF RX flaky (serial clone not working, but receives text on serial.) |
|
|
|
| 64 |
Sensor OK, LED OK, Charging OK, RF RX OK |
|
Ninja Modern |
CSang (WSN) |
| 65 |
Sensor OK, LED OK, Charging OK, RF RX OK |
|
Ninja Modern |
|
| 66 |
Sensor OK, LED OK, Charging OK, RF RX OK |
|
Ninja Modern |
|
| 67 |
Sensor OK, LED OK, Charging OK, RF RX OK |
|
Ninja Modern |
CSchwede(IBSKOMM) |
| 68 |
Sensor OK, LED OK, Charging OK, RF RX OK |
|
Ninja Modern |
|
| 69 |
Sensor OK, LED OK, Charging OK, RF RX OK |
|
Ninja Classic |
CSang (WSN) |
Batch 3¶
| Module ID |
Test Report |
Notes |
Case |
Borrowed |
| 70 |
Sensor OK, LED OK, Charging OK, RF RX OK |
Antenna is internally disconnected! |
Ninja Modern |
|
| 71 |
Sensor OK, LED OK, Charging OK, RF RX OK |
|
Ninja Modern |
NDiller (MPU_vs_Bosch) |
| 72 |
Sensor OK, LED OK, Charging OK, RF RX OK |
|
Ninja Classic |
THermann (ClimateWindow) |
| 73 |
Sensor OK, LED OK, Charging OK, RF RX OK |
|
Ninja Modern, no lid |
|
| 74 |
|
System Controller not programmable, No battery yet |
|
|
| 75 |
Sensor OK, LED OK, Charging OK, RF RX OK |
|
Ninja Modern |
|
| 76 |
Sensor OK, LED OK, Charging OK, RF RX OK |
|
Ninja Modern |
CSchwede(IBSKOMM) |
| 77 |
Sensor OK, LED OK, Charging OK, RF RX OK |
|
Ninja Modern |
|
| 78 |
Sensor OK, LED OK, Charging OK, RF RX OK |
|
Ninja Modern |
TKorthals (AMiRo) |
| 79 |
|
No power connection via USB, No battery yet |
|
|
Batch 4¶
| Module ID |
Test Report |
Notes |
Case |
Borrowed |
| 80 |
Sensor OK, LED OK, Charging OK, RF RX OK |
|
Ninja Modern |
DMW Schwarze (Cognihome) |
| 81 |
Sensor OK, LED OK, Charging OK, RF RX OK |
|
Ninja Modern |
DMW Schwarze (Cognihome) |
| 83 |
Sensor OK, LED OK, Charging OK, RF RX OK |
|
Ninja Modern |
CSang(WSN) |
| 84 |
Sensor OK, LED OK, Charging OK, RF RX OK |
Antenna cut by students |
Ninja Modern |
ABarch(Motion Data Recording) |
| 85 |
Sensor OK, LED OK, Charging OK, RF RX OK |
MPU Fifo overflows sometimes |
Ninja Modern |
|
| 88 |
Sensor OK, LED OK, Charging OK, RF RX OK |
|
Ninja Modern |
|
Extension Modules¶
| Name |
Available |
Borrowed |
Notes |
In Case |
Empty Cases |
Case Color |
| AmbiSense |
8+1 Prototype |
1x THermann (Smart Cup), 1x THermann (ClimateWindow), 1x DMW Schwarze (Cognihome), 1x CSang (WSN) |
|
8 |
6, 1 top piece |
MEDIUM LAVENDEL |
| AudioAmp |
6 |
1x THermann (328/no AMP) , 2x JAnlauff/SRL), 1x DMW Schwarze (Cognihome, 2.4) |
Number 3 has short |
0 |
11 raw top pieces |
Green |
| BLE |
7 |
1x MHesse, 2x JAnlauff/SRL |
|
0 |
12 raw top pieces, 2 raw bottom pieces |
Blue |
| Breakout |
29 |
1x MHeinz, 3x JAnlauff/SRL, 1x THermann (Smart Cup), DMW Schwarze (Cognihome), 1x NKroemke(ISY PLANT) |
|
0 |
4 raw top pieces |
Yellow |
| Infrared |
3+1 Prototype |
2x JAnlauff/SRL |
|
0 |
5 raw top pieces |
Black |
| MakeyMakey |
5+1 Prototype |
1x JAnlauff/SRL (Prototype) |
|
2 |
0, 4 raw top pieces, 1 raw bottom piece |
BR.YEL-GREEN |
| Proximity |
15 |
1x JAnlauff/SRL, 1x DMW Schwarze (Cognihome) |
|
14 |
4 |
Medium Azur |
| SDCard |
11 |
2x MHeinz, 2x JAnlauff/SRL, 1xTHermann (ClimateWindow) |
|
0 |
10 top pieces |
Md.Blue |
| VibroSound |
7 |
1x JAnlauff/SRL, 1x THermann (Smart Cup), 1x TPfeiffer (ICSPACE), DMW Schwarze (Cognihome) |
|
6 |
1 raw top piece, 2 bottom pieces, 7 raw bottom pieces |
Red |
| ButtonMatrix |
2 |
|
|
0 |
3 raw top pieces, 1 raw bottom piece |
Orange |
| Potentiometer |
2 |
|
|
0 |
2 raw top pieces |
White |
| Servo |
2 |
|
|
0 |
3 raw top pieces |
Reddish Brown |
| BNO055 |
5 |
1x DMW Schwarze (Cognihome), 1x NDiller (MPU_vs_Bosch) |
|
|
|
|